Regulator series F-BH-3
The gas pressure regulator F-BH 3 offers the possibility of fine gas regulation. Compared to the F-BH 2 regulator, the F-BH 3 regulator has a significantly higher capacity. You can download the technical documentation in pdf format.
For precise regulation of gas pressure from full flow to low flow (pilot flow), UNIS-FAGAS Sarajevo has produced, in addition to the F-BH 2 regulator, a higher-capacity regulator F-BH 3. This regulator is certified by the Institute of Gas Engineering IGT in Sarajevo, as well as the American Institute CSA-INTERNATIONAL and meets the standards of:
ANSI Z 21.80. I CAN.6.22-M97
ANSI Z 21.18. I CAN 6.3.2000
The F-BH 3 controller can be supplied with a built-in valve limiter type “F” with connection 3/8 “NPT. In case of membrane rupture, gas leakage is limited and is within the limits defined by the ANSI standard. The F-BH 3 controller with integrated valve stop must be mounted in a horizontal position (valve facing upwards). Without the valve stop, the F-BH 3 controller can be installed in all positions.
| Inlet pressure | 2, 5, 10 PSI |
| Output pressure | 7“-11“ Vs |
| Operating temperature | -40ºC to + 90ºC |
| Connections | NPT or Rp 1/2“x1/2“; 3/4“x3/4“; 1“x1“ |
| Temperature range | -20ºC to + 60ºC |
| Mass | 0,78 kg |
| Gases | Natural gas, LPG |
